|
|
Axial flow pumps
Capacity: up to 80.000 m3/h Head: Up to 9.5 m Temperature: Up to 200 °C MAWP: up to 10 bar
Flange drilling: DIN or ANSI Sizes: DN 300 (12") – DN 2000 (80")
Applications
- Continuous circulation of corrosive/abrasive solutions, brine slurries, process wastes
- Crystallisation and evaporation processes (brine, seawater)
- Salt plants
- Various chemical plants
- Regeneration plants
- Waste water treatment
- Potash plants
|
 |
|
Submersible dewatering pumps
Submersible dewatering pumps
SJ submersible dewatering pumps
|
|
|
Heavy duty electrosubmersible slurry pumps
SHW pump
SHW-R Submersible slurry pump
Vertical Slurry Pumps
|
 |
Greater reliability and durability than conventional vertical process pumps. Warman SP SPR
Warman GPS vertical slurry pumps
Warman 5000 vertical sump pump |
|
Horizontal Slurry Pumps
Medium to Severe duty slurry pumps for a range of mill duties.
|
 |
| Type |
Size range (discharge) |
Capacities |
Heads |
Pressures |
| Warman AH pump |
1” to 18” |
22,000 gpm to 5,000 m3/hr |
180 ft to 55 m
|
300 psi to 2,020 kPa |
| Warman L pump |
75” to 26” |
45,000 gpm to 10,225 m3/hr |
180 ft to 55 m |
250 psi to 1,725 kP |
| Warman MC pump |
5” to 30”
|
45,000 gpm to 10,225 m3/hr
|
180 ft to 55 m
|
130 psito 900 kPa
|
Warman AHF MF LF pump
|
2” to 14”
|
14,000 gpm to 3,150 m3/hr
|
120 ft to 37 m
|
150 psi to 1,725 kPa
|
Warman XU pump
|
3” to 12”
|
10,000 gpm to 2275 m3/hr
|
240 ft to 73 m
|
150 psi to 1,035 kPa
|
Warman MD pump
|
6" to 16"
|
20,000 gpm to 4545 m3/hr
|
275 ft to 84 m
|
150 psi to 10 bar
|
Warman HTP pump
|
20” to 24”
|
40,000 gpm to 9100 m3/hr
|
220 ft to 67 m
|
580 psi to 4,000 kPa
|
Warman AHP/AHPP pump
|
4” to 18”
|
20,000 gpm to 4,550 m3/hr
|
240 ft to 73 m
|
1,000 psi to 6900 kPa
|
Warman 1000 pump
|
1.5” to 12”
|
6,500 gpm to 1,480 m3/hr
|
140 ft to 43 m
|
232 psi to 1,600 kPa
|
Warman HH H HRM pump
|
1” to 6”
|
4,500 gpm to 1,0250 m3/hr
|
325 ft to 100 m
|
750 psi to 5,170 kPa
|
Warman GSL Pump
|
24” to 40”
|
80,000 gpm to 18,1800 m3/hr
|
105 ft to 32 m
|
125 psi to 860 kPa
|
Features
- Size range (discharge)
1” to 18”
25 mm to 450 mm
- Capacities
to 22,000 gpm
to 5,000 m3/hr
- Heads
to 240 ft
to 73 m
- Pressures
to 300 psi
to 2,020 kPa
Benefits
- Bearing assembly – a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
- Liners – easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomer. Elastomer seal rings back all liner joints.
- Casing – Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
- Impeller – front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
- Throatbush – wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
- One-piece frame – a very robust one-piece frame cradles the cartridge type bearing and shaft assembly. An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance.
|
