MISL Energy

We provide a complete product line of actuators and accessories to meet all your valve automation requirements. XOMOX Valves can be readily and inexpensively equipped with a variety of pneumatic, electrical or hydraulic actuators. We also supply a complete line of actuator devices and accessories (e.g. positioners, limit switches, solenoid valves, air filters, etc.) to complement your valving needs. Applications
ELS Series - Torques up to 221 in-lbs Compact Weatherproof Housing NEMA 4X rated Thermalstatic Protection as well as Fan Cooled Motors Cam Actuated Limit Switches are Simple to Adjust and Cover up to 270 Degrees of Rotation 50% Duty Cycle Options Available - 2 Extra Limit Switches, 3 Position Control, 4-20 mA Transmitter 120 VAC or 20 VDC, 4-20 mA Positioner Control, Electronic Speed Controller,Intergal 25W Heater
EL Series - Torques up to 7,080 in-lbs Compact Weatherproof Housing NEMA 4X rated Thermalstatic Protection as well as Fan Cooled Motors Torque Switches to Protect Unit from Damage from Obstructions 30% Duty Cycle Manual Override 4 Cam Actuated Limit Switches are Simple to Adjust. From both Prevention of Overtravel and Remote Position Indication 25W Heater Options - NEMA 7, 3 Position Control, 4-20 mA Transmitter 120 VAC or 20 VDC, 4-20 mA Positioner Control, Electronic Speed Controller, 180 Degrees Rotation, Multi-turn (10 Turns Max), Low Temperature to -40 degrees
EL 1200 & 2500 Torques 10,580 to 22,125 in-lbs Compact Weatherproof Housing NEMA 6 rated Thermalstatic Protection as well as Fan Cooled Motors Torque Switches to Protect Unit from Damage from Obstructions Reg-U-Tork Electromechanical Torque Regulator/Limiter to Protect Valves from Damage 30% Duty Cycle Integral Motor Centrifugal Switch for Smooth Starting and Stopping 50W Heater Options - NEMA 7, Multi-position Control, Potentiometer4-20 mA Transmitter 120 VAC or 20 VDC, 4-20 mA Positioner Control, Electronic Speed Controller, 180 Degrees Rotation, Low Temperature to -40 degrees
ELQ Series Torques up to 7,080 in-lbs 100% Duty Cycle Motor Directly Connectable to Different Supply Voltages Modular Design with Plug-in Connections Electronic Motor Control NEMA 4 and IP67 Simple to Integrate in Process Automation Systems, such as Fieldbus The Pinion Drive Output is a Female Spline, Through the use of a Male Spline Adaptor almost any Female Drive Configuration can be made Flange Connection ISO 5211 Options - NEMA 7, 9 and IP68, Positioner, Position Transmitter, Status Information, Communication Card, Speed Control and Local Control Station
Application for Valves & Actuators A) Dangerous Process Media Explosive Flammable Toxic B) Other Process Media Potable Water Demineralized Water Coolwater Seawater Steam Mineral Oil Gases Corrosive Media Food Pharmaceuticals Fine Chemicals Media and Solids Heating Oil Viscous media