|
Dresser Piping Specialities |
|
The Dresser Piping Specialities operation of Dresser, Inc., markets a complete line of piping specialties for the natural gas, water distribution, and general industrial markets. The broad product line includes:
Style 38 Couplings
Dresser Style 38 couplings provide flexible, leakproof connections that lasts longer than the pipe. No costly threading, beveling, exact pipe fitting or alignment is required. Style 38 Couplings are available for:
-
from sizes 1/2" to 48"
-
Available for steel, Cast Iron and other material Pipe
-
largest selling coupling for both the gas and the water industry (please specify your conditions)
|
|
Style 110 Reinforcing Sleeves
Style 110 Reinforcing Sleeve for welded joints is designed to be used at highways, rivers and railroad crossings, at overbends, at tie-ins etc.
Product lends itself to field welding, without preheating, using ordinary field welding procedures.
Can be supplied in all sizes, lengths and thicknesses.
|
|
Style 90 Universal Couplings
Will join any combination of steel and P.E. pipe, using only a simple wrench. Coupling's locking design creates positive pipe restraint. Can be supplied with AL-CLAD Plastisol coating for protection no field coating can match. In sizes 1-1/4" and 2" with 5" middle ring.
|
 |
Style 408 Couplings
Style 408 service connectors for P.E. main to P.E. service connections offer an economical alternative to difficult heat fusion service connections. Service outlet features "Seal Plus" restraining end design in 2", 3" 4" and 6" P.E. main sizes, with 5/8" , 7/8" and 1-1/8" branch sizes.
|
 |
700 POSI-HOLD Universal Couplings
Style 700 POSI-HOLD couplings provide a complete system for joining any combination of steel and P.E. pipe. Using a unique hydraulic application principle, and requiring only simple tools, these couplings can be installed gas-tight in minutes. In size 3", 4" and 6".
|
 |
Style 711 POSI-HOLD bolted Coupling
There's need for special tools or procedures with the Dresser Style 711 POSI-HOLD bolted coupling. With minimal training, any workman cna make consistent, reliable joints on steel to steel, steel to P.E.or P.E. to P.E pipe, using ordinary wrenches. Plus, the Style 711 coupling can be used where both pipe ends are anchored or abutted. This permits use as a final connection on tie in applications, even steel to steel.
|
 |
Application
- Natural Gas, Oil and Chemical Industries
- Water Treatment
|
|
|
You might also be interested:
|
|
|
Brands